Paraloid™ B-72 by-the-gram
Paraloid™ B-72 is a thermoplastic acrylic resin supplied as solid pellets. It is commonly used as a consolidant and adhesive for mineral specimens, fossils, ceramics, wood, and other porous materials. The resin dissolves in solvents such as acetone, ethanol, or toluene to produce solutions of various concentrations.
When applied, Paraloid B-72 forms a clear acrylic film that helps consolidate fragile materials and can be removed later with appropriate solvents. Because of its stability and reversibility, it is widely used in museum conservation and restoration.
Applications
Consolidating fragile mineral specimens
Stabilizing fossils
Repairing broken specimens
Surface consolidation of porous materials
Conservation and restoration projects
Characteristics
Clear acrylic resin
Supplied as dry pellets
Soluble in acetone, ethanol, and other suitable solvents
Reversible with compatible solvents
Non-yellowing under normal conditions
Stabilization Instructions
-
Clean using a soft brush and water to remove dust or dirt.
-
Dry the specimen for 24 hours at room temperature if it is wet. (Wet specimens will not stabilize properly and may develop a white residue).
-
Document the weight before beginning.
-
Mix B-72 with a solvent (Acetone or 100% Ethanol) to a 10% concentration (e.g., 10g B-72 to 90g solvent) and stir until dissolved.
-
Use a dropper or dip the specimen into the solution.
- Allow it to dry completely (several hours).
-
Any remaining white or shiny residue can be removed with a quick rinse of solvent.
Note: By purchasing this item you agree that you have read our WARNINGS and NOTICES! (also serves as FAQ's).
